煤催化气化条件下不同煤种煤灰烧结行为研究

选取9类典型煤种,利用压差法测定烧结温度的实验装置,结合灰渣的XRD分析结果,考察了添加K基碱金属催化剂、不同煤种灰成分对烧结温度的影响。结果表明,碳酸钾催化剂的添加,明显降低高铁钙含量的WJT煤的灰熔点及烧结温度,碱金属K化合物极易同煤中Fe、Ca的矿物质反应生成低温共融物进而加剧煤灰的熔融结渣。不同煤种烧结温度的差异与煤灰中硅、铝、铁、钙含量密切相关。铝、硅含量高的煤灰烧结温度较高,而铁、钙含量高的煤灰烧结温度相对较低。碱金属K催化剂的添加加剧了煤灰的烧结结渣,而钙、铁的存在会加速硅铝酸盐间的反应生成低温共融物进而加速灰熔融。各煤种烧结温度的变化与其灰成分在CaO-SiO₂-Al₂O₃、FeO-SiO₂-Al₂O₃三元相图上的位置相吻合。     

Qualitative and quantitative ATR-FTIR analysis and its application to coal char of different ranks

This paper analyzes the coal to char stages of char formation of six coals of different ranks by using Fourier transform infrared coupled w ith attenuated total reflectance(ATR-FTIR).The chars w ere obtained by coal pyrolysis carried out at temperature range of 450~700℃.The data obtained show s the pragmatic disappearance of the aliphatic hydrogen content w ith increasing char formation temperature.Numerical evaluation of the spectra enabled the determination of aromaticity,fa.The aromaticity w as found to be betw een 0.66~0.79 for lignite,0.75~0.90 for sub-bituminous,0.84~1.00 for low volatile bituminous,0.83~1.00 for high volatile bituminous,0.94~1.00 for semi-anthracite,and 0.97~1.00 for anthracite respectively.With increasing rank of coal samples,spectra exhibit rising aromaticity and enhanced condensation of aromatic rings,w hereas the aliphatic chain lengths decrease.     

不同的灰熔点调控方式对煤灰熔融特性的影响

对两种原始煤灰进行混合,并分别搭配不同的添加剂,得到3种元素组成相同的煤灰,灰熔点测试结果显示,三者的灰熔点存在较大差异。结合X射线衍射技术和SEM-EDX(扫描电子显微镜与能谱联用)分析了3种煤灰(>800 ℃)在高温时的矿物质转化过程。结果表明,不同的灰熔点调控手段对不同煤的影响是不同的。原因是高温时矿物质组成不仅与煤灰化学元素组成相关,更与元素在矿物质中的赋存状态有关。两者共同决定了煤灰的熔融特性。     

东胜长焰煤热解含氧官能团结构演化的13C-NMR和FT-IR分析

以东胜煤田色拉一号井田2号煤层长焰煤为研究对象,利用浮沉离心法富集其镜质组。基于工业分析、元素分析、¹³C-NMR、FT-IR、谱图分峰拟合技术和化学分析测试,求取镜煤及一系列热解煤含氧官能团结构与含量参数,从不同角度研究了含氧官能团的分布规律与演化特点。镜煤中羧基、羰基含量分别为8.91~10.90 mol/kg、1.61~1.79 mol/kg,随热解温度升高羧基显著减少。热解作用促使以端基形式连接在脂肪链或脂肪环结构氧上的甲基和亚甲基首先脱去,且在温度高于350 ℃后基本稳定。氧在热解过程赋存状态的变化是芳香体系与脂肪体系相互竞争的结果,510 ℃热解煤中芳香类氧和脂肪类氧的含量分别为7.49、3.45 mol/kg。羟基的演化过程与热解过程中氧的赋存状态密切相关。随着热解过程的进行,在热解温度低于440 ℃时,各种羟基含量均减少,热解过程对于大分子网络的破坏干扰了各种氢键作用,而羟基π作用则暂时增强,至510 ℃时各种氢键含量均降为最低。东胜长焰煤中含氧官能团化学活性顺序为:[COOH]>[R-O]>[Ar-O-Ar,Ar-O-C,C-O-C]>[C=O]。镜煤非活性醚键含量为0.68 mol/kg,活性醚键为0.48 mol/kg,主要为非活性醚键。     

水蒸气对褐煤原位气化半焦反应性能及微观结构的影响

为了揭示水蒸气对半焦反应性和微观结构的影响,在自制两段新型反应器上依次进行了褐煤干燥、热解及"热"焦的水蒸气原位气化研究。利用TGA、BET和Raman光谱仪,对原位气化半焦进行反应性和微观结构解析。结果表明,在反应温度为600 ℃时,水蒸气对半焦转化率、反应性及微观结构影响很小。温度达到700~900 ℃,在半焦与水蒸气接触的前2 min,虽然半焦转化率变化不大,但其反应性、小环(3~5个芳环)与大环(≥6个环)体系之比及含氧官能团却急剧降低;大于2 min,半焦转化率逐渐增大,反应性、小环与大环之比及含氧官能团缓慢降低;而半焦孔结构在2 min 前后却具有基本一致的变化趋势。半焦与水蒸气接触的前2 min,小环与大环之比和含氧官能团急剧降低是导致反应性显著降低的重要因素,大于2 min,芳环体系的变化是导致反应性进一步降低的原因。     

准东高碱煤气化过程中碱金属迁移与结渣特性实验研究

利用循环流化床对天池木垒高碱煤进行了气化实验研究,获得了天池木垒高碱煤在循环流化床上的结渣特性及碱金属迁移规律,并对实验中出现的床内颗粒聚团现象进行了分析。结果表明,不同存在形态的碱金属在煤气化过程中的迁移规律不同,水溶钠和醋酸铵溶钠在煤气化过程中以气态形式析出,不溶钠主要存在半焦中;随着气化温度升高,底渣和煤气中钠含量增加,飞灰中钠含量减少;尾部管道温度降低过程中,煤气中钠的冷凝速率明显高于钾;天池木垒高碱煤气化过程中容易引起床内颗粒聚团,床温越高,颗粒聚团现象越明显,床温波动越大;碱金属与灰分中矿物成分及床料中SiO₂反应生成黏性低温共熔物是导致颗粒聚团的关键。     

褐煤半焦直接加氢制甲烷反应特性及其孔结构和表面形态变化

在高温高压(1 000 ℃、12 MPa)固定床反应器上对内蒙古褐煤半焦的加氢甲烷化反应特性进行了研究,采用氮吸附和扫描电镜(SEM)对甲烷化残渣比表面积、孔结构和表面形态进行了表征。结果表明,半焦加氢甲烷化可分为加氢热解、快速加氢和慢速加氢等三个反应阶段,每阶段分别发生含氧官能团和烷基侧链加氢反应、芳环结构加氢反应以及贫氢骨架碳结构加氢反应。半焦加氢甲烷化最优反应温度为800 ℃,反应压力为3.0~4.0 MPa;提高升温速率可以缩短前段(碳转化率低于46%)反应过程时间,对后段(碳转化率高于46%)反应过程影响较小。半焦甲烷化残渣的吸附-脱附等温线呈反S型,滞后环呈H3回线形状;在甲烷化反应过程中,半焦平均孔径先减小后增大,总孔容积和介孔容积逐渐增大,微孔容积和比表面积先增大后减小。     

Self‐Assembled Cage‐Like Protein Structures

Proteins and protein‐based assemblies represent the most structurally and functionally diverse molecules found in nature. Protein cages, viruses and bacterial microcompartments are highly organized structures that are composed primarily of protein building blocks and play important roles in molecular ion storage, nucleic acid packaging and catalysis. The outer and inner surface of protein cages can be modified, either chemically or genetically, and the internal cavity can be used to template, store and arrange molecular cargo within a defined space. Owing to their structural, morphological, chemical and thermal diversity, protein cages have been investigated extensively for applications in nanotechnology, nanomedicine and materials science. Here we provide a concise overview of the most common icosahedral viral and nonviral assemblies, their role in nature, and why they are highly attractive scaffolds for the encapsulation of functional materials.     

Analysis of a new drug of abuse: Cathinone derivative 1‐(3,4‐dimethoxyphenyl)‐2‐(ethylamino)pentan‐1‐one

Recently, novel psychoactive drugs for human abuse such as amphetamines, phenethylamines, benzofuries, and tryptamines, cathinones have gained high popularity. These designer drugs are mainly sold via online stores as “bath salts” and are labeled “not for human consumption.” Due to the novelty of the compounds, only a little information about pharmacology, toxicology, and the long‐term damage they may cause is available. Moreover, there are only few analytical methods for their identification and analysis. Among new cathinone derivatives, 1‐(3,4‐dimethoxyphenyl)‐2‐(ethylamino)pentan‐1‐one (DL‐4662), became available via an internet shop. A sample of this compound was purchased and investigated. The first aim of our study was an identity check by NMR spectroscopy and gas chromatography with mass spectrometry. As many of the recreational drugs are chiral and are mainly sold as racemates, a further goal of our research was enantioseparation by gas chromatography with mass spectrometry and high‐performance liquid chromatography with UV detection, to prove whether DL‐4662 was traded enantiomerically pure or as racemic mixture. Both chiral separation methods showed the presence of a racemate.     

Automated headspace solid‐phase microextraction and on‐fiber derivatization for the determination of clenbuterol in meat products by gas chromatography coupled to mass spectrometry

A method was developed for the determination of clenbuterol in meat using stable‐isotope‐dilution gas chromatography with mass spectrometry coupled with solid‐phase microextraction and on‐fiber derivatization. The samples were first homogenized with hydrochloric acid followed by protein deposition. After headspace solid‐phase microextraction and on‐fiber derivatization, the content of clenbuterol was measured with the aid of stable‐isotope dilution. The condition of solid‐phase microextraction was optimized by central composite design. The relative standard deviations, limit of detection, and recoveries for clenbuterol were 4.2–9.2%, 0.48 μg/kg, and 96–104%, respectively. The proposed method was satisfactory for analysis of real samples as compared with the Chinese standard method.